© GES Electronic & Service GmbH www.ges-electronic.de
© GES Electronic & Service GmbH www.ges-electronic.de
77
Series
MC
S
Series
Panel cut out
D1 mm [inch]
L1 mm [inch]
22.20 [.874"]
10.10 [.398"]
Assembly instructions (GB/GS)
Part as delivered
contacts (1), insulation part (2), housing (3)
Remove dielectric insulation of single wires
(L3 = 4 mm [.157"])
Do not damage conductor.
Crimp or solder one contact (1) each on every conductor
Tin-solder must not remain on contact surface!
Carefully remove cable jacket
(L2 = min. 30 mm [1.181"])
Do not damage metal shield.
Slide contacts (1) completely into insulation
part (2) until contacts snap
Put in all contacts at the same time
Fold back shield
Put insulation part (2) into housing (3)
Pay attention to notches.
Remove any filling elements from cable
Assembly finished
1.
6.
2.
7.
3.
8.
4.
9.
5.
10.
!
!
...
!
...
