Gerni Ultimate 130.1, User Manual

Page: 7 / 12

7
4.0 Maintenance 6.0 Recycling the washer
7.0 Questions and an swers
Why must the high pressure washer be stored in a
frost free room?
The machine may contain water which, when freez-
ing, may damage vital parts.
How do I store my high pressure washer in the best
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply.
Can I do anything special to keep my high pres sure
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
5.0 Storage
The machine should be stored in a frost-free
room!
Pump, hose and accessories should al ways be
emptied of water prior to storing as fol lows:
1. Stop the machine (rotary switch (2) in pos.
O )
and de tach water hose and ac ces so ry.
2. Restart the machine and activate the trig ger.
Let the machine run until no more water runs
through the spray gun.
3. Stop the machine and unplug. Wind the elec-
tric cable round the hooks placed on the side
of the machine.
4. Separate spray gun and high pressure hose.
5. Coil the high pressure hose up on the hose
reel.
6. Place spray gun, nozzles and other ac ces -
so ries in the holders of the machine.
Should the machine by mistake be frozen, it will
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
WARNING! Always disconnect the plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
• Wash out water hose, high pressure hose, spray
lance and accessories before mounting.
• Clean the couplings of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a lower water
volume This is why clean ing is re quired immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning nee dle (8).
IMPORTANT: The needle should only be used
when the spray lance is detached!
3. Flush the spray lance backwards with wa ter.
4.2 Cleaning of water inlet fi lter
Clean the water inlet fi lter regularly once a month or
more frequently according to use.
1. Detach water inlet hose and coupling (3).
2. Pull out the fi lter and rinse it carefully.
3. Check that it is intact before re-mount ing it.
Make the old washer unusable immedi-
ately.
1. Unplug the washer and cut the electric
cable.
Do not discard electrical appliances with
household waste.
As specifi ed in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
recycled ecologically.
Contact your local authorities or your nearest dealer
for further information.