4
Original instructions
ration.
The operator and anyone in
the immediate vicinity of the
site of cleaning should take
action to protect themselves
from being struck by debris
dislodged during operation.
Wear goggles and protective
clothes during operation.
This appliance has been de-
signed for use with cleaning
agents supplied or recom-
mended by the manufacturer.
The use of other cleaning
agents or chemicals may
adversely affect the safety of
the appliance.
To ensure the appliance
safety only use original spare
parts from the manufacturer
or approved by the manufac-
turer.
High pressure hoses, fi ttings
and couplings are important
for the safety of the appli-
ance. Only use hoses, fi ttings
and couplings recommended
by the manufacturer.
Do not use the appliance
if a supply cord or impor-
tant parts of appliance are
damaged, e.g. safety device,
high pressure hose and trig-
ger gun.
Remove the plug from the
socket outlet during cleaning
or maintenance and when
replacing parts or converting
the machine to another func-
tion.
The appliance is intended for
cleaning outdoors.
Appropriate ear protection
must be used.
Do not cover the machine
during operation.
Never use the machine in
an environment where there
could be a danger of explo-
sion. If any doubt arises,
please contact the local
authorities.
It is not allowed to clean
asbestos- containing surfaces
with high pressure.
WARNING! Risk of explo-
sion -Do not spray fl ammable
liquids.
Always swith off the mains
disconnecting switch when
leaving the machine unat-
tended.
This high pressure washer
must not be used at tempera-
tures below 0°C.
Never let any persons stand
under the product when
stored on the wall.
WARNING!
Inadequate extension cables
can be dangerous. If an exten-
sion cable is used, it shall be
suitable for outdoor use, and
the connection has to be kept
dry and off the ground. It is rec-
ommended that this is accom-
plished by means of a cable
reel which keeps the socket at
least 60 mm above the ground.
Cables on extension lead
drums should always be com-
pletely unwound to prevent the
cable from overheating.
Extension cables must comply
with the below-mentioned re-
quirements for length and cable
dimensions.
1.0 mm²
max.
12.5 m
1.5 mm²
max.
20 m
2.5 mm²
max.
30 m
If the electric cable is
damaged, it must be re-
placed by the manufacturer
or his service agent or simi-
larly qualifi ed person in order
to avoid a hazard.
Mains power connection
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:
The electric installation shall
be made by a certifi ed elec-
trician and comply with IEC
364.
It is recommended that the
electric supply to this appli-
ance should include either a
residual current device that
will interrupt the supply if the
leakage current to earth ex-
ceeds 30 mA for 30 ms.
Water connection
Connection to the public mains
according to regulations.
Inlet hose can be connected
to the water mains with a max.
inlet pressure of 10 bar.
IMPORTANT! Only use wa-
ter without any impurities.
If
there is a risk of silt, sand or
sediment in the inlet water (i.e.
from your own well), an addi-
tional fi lter should be mounted.
Safety devices
Locking device on spray gun
(7a)
(see illustration at the end
of this manual)
:
The spray gun features a lock-
ing device. When the button is
activated, the spray gun cannot
be ope rated.
Thermal sensor:
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
Pressure safety device
An integrated hydraulic safety
valve protects the system from
excessive pressure.
