8
Original instructions
4.3 Water connection
An ordinary 1/2" garden hose of
min. 10 m
and
max. 25 m
will
be suitable.
NOTE
: Connection to the public
mains according to regulations.
IMPORTANT! Only use wa-
ter without any impurities.
If
there is a risk of silt, sand or
sediment in the inlet water (i.e.
from your own well), an addi-
tional fi lter should be mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
Note:
Check
that the fi lter is
fi tted in the water
inlet pipe and that it is clean
and free from debris (it is fac-
tory fi tted).
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 50°C).
3. Turn on the water.
4.4 Telescopic handle
(Super 130.2, 135.2,
140.2, 140.2 Plus)
The machine (Super 130.2,
135.2, 140.2, 140.2 Plus) fea-
tures a tele scopic handle. To
raise or lower the handle, press
the knob and move the handle
upwards or downwards. When
a click is heard, the handle is in
right position.
Press the button to detach the
Click & Clean nozzle.
