background image

6

• Wear shoes with non-slip soles.
• Wear goggles, ear protection and protective clothes 

during operation.

 

 

Transporting the  high pressure washer

• When transporting the machine in or on a vehicle, it 

must be secured, e.g. with straps, so that it cannot slip 
or tip over.

• Gerni recommends that the machine is positioned 

horizontally on the backside, when transported in or 
on a vehicle.

  

Detergents

• This machine has been designed for use with clean-

ing agents supplied or recommended by Gerni. The 
use of other cleaning agents or chemicals may ad-
versely affect the function of the machine.

 

Before starting the work
Inspecting the machine

• Do not use the machine if a supply cord or important 

parts of the machine are damaged, e.g., safety de-
vice, high pressure hose, and spray handle and spray 
attachments.

• The trigger of the spray handle must move easily and 

automatically return to its starting position when re-
leased.

• Always keep high pressure hose and spray attach-

ment in good condition (clean, moving easily) and cor-
rectly assembled.

  

Electrical 

connection

 WARNING! 

Minimize the risk for electrical shock:

• Voltage and frequency of the machine (see rating 

plate) must match the voltage of and  frequency of the 
mains supply.

• Only connect the machine to electrical installation 

Summary of Contents for poseidon 2

























Reviews: