10
1)
Options / model variants
NEPTUNE 2
4 Control / Operation
4.1
Switching on the
cleaner
1. Move the main switch into
position 'Cold Water' (A)
The control electronics sys-
tem performs a self-test, all the
LEDs light up once.
The motor starts
lights up.
2. Ventilate the machine for air
by activating the spray gun
3. When the water flow is even,
continue with the following
steps:
NOTE!
Always remove any dirt from the
nipple before connecting the spray
lance to the spray gun.
4.2 Connections
C
E
D
4.2.1 Connecting the spray
lance to the spray gun
1. Pull the quick release grip (C)
of the spray gun forwards
and lock it by turning it to the
left.
2. Insert the nipple of the spray
lance (E) into the quick re-
lease connection and turn
the quick-release grip to the
right (D).
3. Pull the spray lance (or other
accessory) forwards to check
that it is securely attached to
0
A
B
4.2.2 Hot water operation (up
to 100
°
C)
1. Move main switch into the
position 'Hot Water' (B) and
select the required tempera-
ture on the temperature con-
trol
2. Unlock the spray gun and ac-
tuate it.
The burner switches on.
In case of interruptions in work:
Also be sure to insert the safety
catch even during short interrup-
tions in work (see Fig. in section
6.1)
IMPORTANT!
In the case of appliances with a
hose reel:
In hot water mode, unwind the
high-pressure hose fully from the
hose reel, as otherwise the hose
reel may become warped due to
the effects of the heat.
