6
Original Instructions
Multi II
warranty rights of the customer remain unaffected.
Manufacturer warranty claims shall be made to the
manufacturer. Statutory warranty rights also remain
unaffected in this case.
Our goods come with guarantees that cannot be ex-
cluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure
and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
Gerni vacuum cleaners for domestic use are war-
ranted for 2 years from the date of purchase by:
Gerni Pty Ltd
Unit 1/13 Bessemer Street
Blacktown NSW 2148
Phone: 1300 556 710
E-mail:
Find your local service agent here:
http://www.Gerni.com.au.
The bene fi ts under this warranty are in addition to
your national law of sale.
Picking up liquids
Before liquids are picked up, always remove the
fi lter bag. Make sure the machine is equipped with a
fi lter appropriate for wet suction. Check that the fl oat
works properly. If foam develops or liquid emerges
from the machine, stop work immediately and empty
the dirt tank.
Connecting electrical appliances
Use the socket on the vacuum cleaner for the pur-
pose defi ned in the operating instructions only. Be-
fore plugging an appliance into the appliance socket:
1. Switch off the vacuum cleaner.
2. Switch off the appliance to be connected.
CAUTION!
Follow the operating instructions and
safety instructions for appliances connected to
the power tool socket. Always unwind the cable
of the vacuum cleaner completely before use.
The power consumption of the connected appliance
must never exceed the value stated on the type
plate of the vacuum cleaner.
The operating voltage shown on the rating plate
must correspond to the voltage of the mains power
supply.
Parts identifi cation
(ref. illu. 1&2, page 4)
A. Button for automatic on/off switch for attached
power tool (auto on/off) *
B. Filter cleaning indicator
C. Button for “Push to Clean”-function *
D. Power outlet
E. On/off switch
F. Variable suction controller *
G. Connection for hose when vacuuming
H. Connection for hose when blowing
I. Handle bar (& storage of power cord)
J. Quick park position (female)
K. Storage options for tubes, nozzles and accesso-
ries
L. Storage option for tube and accessories
M. Tensioning plate for fi lter
N. Filter
O. Dust bag mounting
* Varies depending on model.
