DAN0700
15
Torque limiter
The machine is equipped with adjustable torque limiter,
which
stops the chuck when the adjusted torque has been
reached. The adjustment can prevent, for example, the
screw from sinking too deep. The adjustment scale is
relative and the torque size depends on the used screw,
material and on the selected speed. Start with a smaller
adjustment and increase it gradually until you find the
suitable adjustment for the related work.
When drilling the adjusting collar must be turned to the
position “Drill bit”.
Rotation direction selector switch and locking
The rotation direction of the chuck can be changed with direction
selector switch. Change the rotation direction by pushing the
direction selector to the extreme positions, right or left. If the
direction selector switch is placed to the central position, the
trigger switch is locked. Store and carry the machine always in
this position. The direction selector switch can be used only when
the trigger switch is not pushed and the machine is not rotating.
Electronic main switch and brake
(Possibility for differences between different models)
Push the main switch to switch on the machine. The machine is
equipped with electronic speed regulator; the more you push the
switch, the faster the chuck rotates. The machine stops with
electronic brake (not in all models) when the switch is released,
as a result, the chuck will not keep rotating freely.
6. MACHINE MAINTENANCE AND SERVICE
Control and clean the machine regularly in order to keep it in good condition. The air vents of the
machine should always be kept clean. Unplug the machine from the power outlet and clean it
thoroughly after use. Toxic, inflammable or corroding substances must not be used for cleaning the
machine. Protect the machine, battery and charger from humidity. All the maintenance work must
be performed by professionals.