DAN0700
13
Operating:
•
Do not use the machine if the main switch does not work properly.
•
Always unplug the cable from the power outlet when performing controls, storing or
maintaining the machine.
•
Do not overload the machine.
•
Unplug the machine when not in use.
•
Do not cover the vents of the machine.
•
Store the machine in a dry place out of reach of children and other people who are not able
to operate the machine.
•
Control the machine condition before operating. Control the moving parts, the housing and
the cable for damages and defects. Do not use the machine if damages are found.
•
Keep the machine clean. This increases the ease of use and life span of the machine.
•
Use the machine only for suitable operations it has been designed for.
•
Only qualified and experienced personnel should perform maintenance on the machine.
•
Do not operate the machine if you do not understand the instructions or control the machine.
3. MACHINE SAFETY INSTRUCTIONS
Machine and battery:
•
Place the direction selector switch to the locking position (central position) when the
machine is not in use.
•
Make sure that the battery is locked before using the machine.
•
Before drilling into a wall, make sure that you will not drill into any possible cables, pipes
etc. in the wall.
•
Avoid damaging the battery. Avoid applying shocks to the battery and keep the battery away
from over +50ºC heat.
•
Let the warm battery cool before charging or using it.
•
Charge the battery by using only the original charger.
Charger:
•
Do not leave the battery to the charger when it is not necessary.
•
The charger is for indoor use only. Protect the charger from humidity.
•
Let the charger cool before charging a new battery.
•
Do not use the charger for any other purpose other than for charging the original batteries.
•
Do not leave the charger plugged to the power outlet when not necessary.
NOTE! The batteries included in the machine are not charged. They must be charged fully
before they can be used. For more information on charging the batteries, see this manual.
Always use the battery power until the battery is completely discharged and recharge it fully.
This will maximize the life span of the battery.