German pool SOUS VIDE PRO SVC-113, User Manual

Page: 8 / 19

14 | GERMAN POOL Sous Vide Pro Slow Cook Circulator User Manual GERMAN POOL Sous Vide Pro Slow Cook Circulator User Manual | 15
SVC-113 | SVC-113 |
TROUBLESHOOTING
Problems Causes & Solutions
The appliance does not
start
Make sure that the appliance is properly plugged into a grounded outlet .
Check the power cord for tears and frays . Do not use the appliance if the
power cord is damaged .
Make sure the power button is on and the LED display screen shows the
information .
The LED display screen
reads error code: E06
When sensor detects the presence of steam, water or moisture in the
machine body, the heating process will be halted .
Switch off the device, place it at dry and well-ventilated area for 48 hours
before start up. If the problem persists, please contact our Customer Service
and Repair Centre .
The LED display screen
reads error code: E05
Make sure the water level is between the MIN and MAX levels on the unit
body . The appliance will set off the alarm and switch itself off when the
water level drops below the MIN required for operation.
Turn off the appliance, set the water level properly and restart the appliance.
The LED display screen
reads error code: E02
The digital thermostat is broken. Contact the Customer Service and Repair
Centre .
CLEANING & MAINTENANCE
For frequent use, descaling should be done every month or more often in regions with
hard water .
Note: Power plug must be disconnected before cleaning and repair .
1. Put the appliance in a pot and fill
the pot with water to the “Max”
level indicated on the appliance.
2 . Set the temperature to 70
℃
and
time to 20 minutes .
Max
Video Tutorial