P.5
Warnings & Safety Precautions
4. When product is in use or right after use, DO NOT splash water on the oven door to prevent the
glass door from cracking or breaking.
5. Use a separate power socket (with switch) for this product. Plugging this product into a power strip
may lead to overheating and fire hazard.
6. If product malfunctions during use, stop using it immediately and proceed to “Troubleshooting”
section.
7. DO NOT stand near heat vent when using modes with steam, and when opening the oven door, be
cautious of hot steam to avoid burns and scalding
8. Before connecting product to power switch, make sure the power connection to this product is
equipped with an air switch or leakage protection switch that meets the electrical parameters
marked on the product’s rating label.
9.
DO NOT put heavy objects on the power cord to avoid hazard.
10.
Keep the product and power cord away from heat-generating products, flammable and explosive
materials, to avoid product damage or fire or explosion hazards.
11. If the power cord is damaged, in order to avoid danger, it must be replaced by German Pool
Customer Service and Repair Centre’s qualified technicians.
12.
Use only suitable steaming trays and containers to avoid oil spillage causing fire hazards.
13. Cooking container must be placed properly on the shelf. DO NOT place container directly on the
bottom of the oven cavity to avoid hazard.
14. When the product is in use or directly after use, the oven door surface behind the door handle will
get hot, be careful to avoid getting burns and scalds.
15. After cooking, the temperature in the oven cavity is still high, user must allow the oven cavity to
cool down completely before cleaning to avoid getting burns and scalds.
CAUTION
1. DO NOT use the product door to hang heavy objects, or lean against or sit on the product door to
avoid damaging the product.
2. DO NOT touch the product or plug/unplug the power plug with wet hands / wet feet / barefooted
to avoid electric shock.
3. DO NOT
use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass, as it
may scratch the surface and result in shattering of the glass.
4. This product must be placed on a sturdy and level surface. DO NOT install the product under
plastic lighting equipment or plastic rack to avoid deformation or explosion hazard.
5. Handle the product with care, and lift from the bottom of the product when transporting and
placing it; DO NOT use the oven door handle as supporting point for transport to avoid damage
due to excessive force.
6. DO NOT use steam cleaner to clean this product.
7.
To prevent possible hazards, control panel of the product can only be connected to the specified
heating element.
8. Use only temperature sensors or detectors that are recommended for this product.
