P.12
Basic Operation
3. Setting Temperature & Timer
After selecting cooking mode, press to enter into Temperature Setting, and press or to adjust
desired temperature (short-press increase/decrease by 1°C, long-press increase/decrease by 5°C);
after setting the temperature, press again to enter into Timer Setting, and press or to adjust
desired timer duration (short-press increase/decrease by 1 minute, long-press increase/decrease by 5
minute).
4. Start Cooking
After setting is confirmed, press
and product will start to preheat. After preheating is completed,
buzzer will beep for 1 minute and will flash. Now press
to start cooking; or if product does not
receive any further command in 1 minute, it will automatically start cooking.
Note:
•
Child Lock will automatically engage one minute after cooking starts.
•
During cooking, if user wishes to adjust temperature and time, press to disengage Child Lock
and press to pause cooking, then follow the steps in “Temperature and Timer Setting” section
to adjust temperature and time. After readjustment is completed, press to resume cooking.
•
During cooking, if user needs to open the oven door, press to pause cooking, and remember to
take a step back when opening the door, in order to avoid being scalded by the hot steam.
•
If user wishes to cancel cooking, first press
to disengage Child Lock, then long-press 3
seconds to return to mode-selection status.
WARNING!
•
During cooking, the product surfaces will be hot, DO NOT let children touch the product to avoid
getting burnt or scalded.
•
During cooking, DO NOT stand in front of the heat vent; when placing or retrieving steam tray or
other cooking utensils, please wear oven mittens to avoid scalding.
5. When Cooking Is Finished
When cooking is completed, buzzer will beep 10 times, LED Display Panel will show “End”. Press
to
return to Standby Status; or if product does not receive any further command in approx. 5 minutes, it
will automatically return to Standby Status.
Note:
When cooking is paused or after cooking is completed, the fan will continue to run for an additional 5
minutes to dissipate heat, this is to ensure user safety and prolong the product’s life.
Low Water Tank Reminder
When operating in Steam Mode, if the water tank is not inserted properly, or if the water level becomes
low,
will flash, buzzer will beep to remind user to refill water tank. Please take out water tank, add
water to the maximum mark and reinsert the water tank properly.
Note:
When refilling, DO NOT exceed the maximum water mark to avoid spillage.
1.
或減少鍵
