German pool SAC-109, User Manual

Page: 13 / 64

P.13
Remote Control
TURBO
Cool mode: press turbo button and the turbo signal is sent to the air conditioner, the temperature is preset
as 16°C, high fan speed, swing activated. The display shows corresponding symbols.
Heat mode: press turbo button and the turbo signal is sent to the air conditioner, the temperature is preset
as 31°C, fan speed as preset, swing activated. The display shows corresponding symbols.
Dehumidifying mode: press turbo button and the turbo signal is sent to the air conditioner, the fan speed is
set as low, swing is activated. The display shows corresponding symbols.
Fan mode: press turbo button and the turbo signal is sent to the air conditioner, the fan speed is set as
high, swing activated. The display shows corresponding symbols.
I Feel mode: turbo button disabled.
In turbo mode, the fan speed is set as automatic. The air conditioner quits silent mode.
Under turbo mode, press the mode button to quit the turbo mode and goes into the next mode in the preset
cycle.
Press the “▲”or“▼”button to quit the turbo mode. The present settings remain unchanged, the original
preset temperature increases or decreases by one unit.
Press the fan button to quit turbo mode. Current settings remain unchanged.
Under turbo mode, both vertical and horizontal swings are activated. Press turbo button to quit turbo mode.
Temperature, fan speed and swing return to preset status.
Sleep and eco buttons are disabled.
Swing, timer, healthy, display, auxiliary heating and I feel buttons are enabled.
ECO
Cool or heat mode: press the eco button once and activate the eco-friendly operation. Press the eco button
once more the quit the eco mode.
Under eco mode, turbo button is disabled.
Fan, swing, timer, display buttons are enabled.