German pool SAC-109, User Manual

Page: 11 / 64

P.11
Remote Control
MODE
The mode button cycles between these functions:
I Feel Cool Fan Heat Dehumidifying
Cool mode: preset as automatic fan speed, temperature 23°C, swing off.
Heat mode: preset as automatic fan speed, temperature 23°C, swing off.
I Feel or dehumidifying mode: no temperature display, automatic fan speed, swing off, temperature remains
at 23°C.
Fan mode: preset as high fan speed, swing off, temperature remains at 23°C.
When switching between modes, the remote control memorises the values of the currently selected mode.
For example, when the cooling mode has been set at 23°C, with swing, and at high speed, this setting will
be memorized for the next cooling operation.
SLEEP
Press this button to enter sleep mode, press again to cancel the sleep function.
If more than one sleep mode exist, then press the button again to enter the next sleep mode. By pressing
and holding the sleep button for 3 seconds, and the mode switches between express sleep, ordinary sleep
and comfort sleep.
The display shows the corresponding symbols.
Sleep mode: automatic fan speed, mandatory low fan speed; turbo is disabled during sleep mode.
During fan only and dehumidifying modes, sleep button is disabled.
If the timer is set, the sleep button is disabled.
Press any mode buttons or the on/off button to quit the sleep function.
▲UP & ▼DOWN
Under a mode where the timer can be adjusted, press the “▲”or “▼” button to increase or decrease the
time. Press the “▲”or “▼”button for a second, then the time ascends and descends quickly.
Adjustment range: adds 0.5 hour to the current time; each press increases the time by 0.5h per unit. The
temperature cannot be adjusted while the timer is being set.
Cool or heat mode: every “▲”press increases the temperature by 1°C. Every “▼” press decreases the
temperature by 1°C.
Adjustment range: between 16 to 31°C. Press the “▲”or“▼”button for a second, then the temperature
speedily increases or decreases by 1°C. When the temperature increment or decrement has reached the
limit, pressing the “▲”or“▼”button will not change the temperature output. For example, pressing the “▲”
after 31°C will not increase the temperature any further.
I Feel mode: press the “▲”or“▼”button to increase or decrease the temperature by 1°C. When the
temperature increment or decrement has reached the limit, pressing the “▲”or“▼”button will not change
the temperature output.
Fan or dehumidifying mode: the “▲”or“▼”buttons are disabled.
Under a mode where the time can be adjusted, press the “▲”or“▼” button to increase or decrease the
time. Press the “▲”or“▼”button for a second, then the time ascends and descends quickly.
Adjustment range: the hour (0 to 23 hours), the minutes (0 to 59 minutes).