Operating Instructions
P.5
Attention
- Grater & Filter unit has sharp blades. Pusher should always be in the feeder tube during operation.
- Unplug the unit before cleaning or disassembling.
- Do not immerse the unit in any liquid.
- Do not use melon for juice extraction.
- This appliance is designed with a safety system. If the cover is not placed correctly or if the safety
locks (10) are not securely fastened, the appliance will not function.
Before Using for the First Time
- Check to ensure that the unit’s voltage is complying with that of stated on the unit.
- Practise assembling and dismantling the unit a few times before adding fruit to operate.
Dismantling & Assembly
A. Dismantling
- Turn switch to off, open the Locks (10).
- Remove the Protective Cover (3).
- Remove the Separating Unit (5), then pull the Grater & Filter unit (4) upwards.
B. Assembly
- Place the Separating Unit (5) on Motor Unit (8), push with both hands on the Separating Unit until
it is clicked into place.
- Insert the Grater & Filter Unit (4), turn it clockwise until it sits securely.
- Mount the Protective Cover (3) and fasten the Safety Locks (10).
- Put the Residue Container (9) under the Residue Spout (7), then set the Juice Cup (12) under the
Juice Spout (6).
C. Operating Procedures
1. Before plugging in, make sure the On/Off Switch (11) is off and the Safety Locks are fastened correctly.
2. Cut fruits into small pieces so that they can be fitted into the Feeder Tube (2).
3. Remove the seed or peel from fruits such as apples, peaches, prunes, cherries, etc.
4. Switch on and feed the sliced fruits and vegetables into the Feeder Tube and press down gently with the Pusher (1).
5. Fruits can be fed in continually until the Residue Container is full.
6. Before emptying the Residue Container, switch off the appliance.
