P.8
操作說明
Operating Instructions
5.
6.
5.
6.
Timer
Press the “Timer” key and the digital display
shows “00:30”, representing the default time
is 3minutes. User can press [+] or [-] key to
set the time, [+] for minutes and [-] for hours,
the time can be adjusted from 1 minute to 2
hours and 59 minutes. Press “Timer” key
again to confirm the setting or wait until
the display stops flashing. If the timer is set
to “00:00”, the digital display will flash and
the setting will be cancelled after 3 sec. After
the “Beep” signal, the appliance will stop
the operation and return to standby mode
automatically when the timer reaches the end.
定時
按「定時按鍵」 進入定時設置,定時燈
亮,數碼管顯示默認時間「00:30」,代表
預設時間是3分鐘。可按[+] 或[-] 調節時間,
按[+] 調節分鐘,按[-]調節小時,可調節的
時間範圍由1分鐘到2小時59分鐘。設定好後
按定時鍵確認設置或等顯示器停止閃爍。
當設定時間 為 「00:00」,顯示閃爍,3
秒後取消定時功能。當倒數完畢後,機
器會載發出「嗶」一聲,停止工作,進入
待機狀態。
鎖定
用戶可按「鎖定」 鍵鎖住電磁爐,鎖定
燈亮,此時除「電源開關鍵」 外,不能
進行其他操作。按3秒「鎖定」 鍵取消鎖
鍵功能。
Lock
To activate the lock, user can press the “Lock”
key, this will lock the appliance, the lock
indicator lights up, and no operation will be
allowed, except for “On/Off” key. Hold “Lock”
for 3s to unlock.
Summary of Contents for GIC-HD28T
Page 16: ......