P.8
操作說明
Operating Instructions
9.Press the Timer button and the Timer indicator
flashes. Timer can be set between 0-180 mins, at a
step of 5 min per press. When the Timer button
is pressed, the LED displays 0, the induction
cooker enters Timer mode. Press
“ ”
or
“ ”
to
adjusts the timer between 0 to 180 minutes. After
five seconds, the display will automatically shift to
display the corresponding function. If countdown
function is needed, press Timer button again, the
display displays the countdown time.
10.The induction cooker’s timer has a memory
function. Operating under the timer function, if
the operating mode has been changed to another,
and then another, the final operating mode will
be timed according to the original time setting.
11.To cancel the Timer function, press On/Off button,
and then press ON/OFF to start again.
12.To avoid incorrect operation, activate the lock function
by pressing down on the
“ ”
or
“ ”
buttons
simultaneously. The induction cooker will be
locked. Lock LED indicator L lights up, all controls
including
“ ”
or
“ ”
will be deactivated. To
unlock, press down on the
“ ”
and
“ ”
buttons simultaneously for 1 second; or press
On/Off buton to restart the induction cooker
without the lock function.
13.The appliance is equipped with an overheat
protection. If the pot or pan is getting too hot,
the appliance will switch off, the buzzer sounds
and on the display displays E2. Should this
happen, wait for a few minutes and let the
appliance cool down. After that, the appliance
returns to normal operation.
9.按定時鍵，定時Timer指示燈閃爍，可調節定時
時間0-180分鐘，5分鐘一檔。當按下定時鍵，LED
相繼顯示0，電磁爐進入設置定時狀態。定時功
能可以通過按鍵“ ”或“ ”從 0 到 1 8 0 分 鐘
之間進行時間調整，5秒之後，顯示屏會自動切
換到相應的功能。如需要倒計時功能，再按下定
時鍵，此時顯示屏將顯示倒計時間。
10.電磁爐的定時模式具有記憶功能。即使在已設
定定時的工作過程中轉為到另一個加熱模式，
然後再轉為另一個工作模式，此前初始定時模
式將被記憶，電磁爐將並按照此定時加熱。
11.如果你需要取消定時功能，只需按開/關鍵先關
閉，然後再按開/關鍵重新開機即可。
12.為避免由於誤操作而改變電磁爐加熱狀態，可
按鎖定鍵，雙指同時按“ ”或“ ”鍵，電
磁爐即進入鎖定狀態。鎖緊LED指示L，此時其
它功能“ ”或“ ”調節按鍵無效（開關鍵除
外）。解鎖：在電磁爐鎖定狀態下雙指同時按
“ ”及“ ”鍵1秒，或按開關鍵關機後重啟，
電磁爐自動解除鎖定狀態。
13.該電磁爐有過熱保護功能。如果鍋或者盤的溫
度過高，電磁爐會自動關機，蜂鳴器會響起，
顯示板會閃爍E2代碼。當上面過熱這種情況發生
時，等待數分鐘以使得電磁爐冷卻下來後再重
新開機，電磁爐將恢復正常工作。
