P.13
常見故障和處理
Troubleshooting
型號
Mode
l
GIC-DF28B
電壓
Voltage
220-240V~
功率
Power
2800W
爐面玻璃產地
Origin of Glass/Ceramic Cooktop
德國
Germany
開孔尺寸(高x闊x深)
Cut-out Dimensions (H x W x D)
9.0 x 67 x 40 cm
產品尺寸(高x闊x深)
Product Dimensions (H x W x D)
8.2 x 69.0 x 42.0 cm
淨重
Net Weight
11.8 kg
技術規格
Technical Specifications
產品規格及設計如有變更，恕不另行通知。
Specifications are subject to change without prior notice.
中英文版本如有出入，一概以中文版為準。
If there is any inconsistency or ambiguity between the English version and the Chinese version,
the Chinese version shall prevail.
本產品使用說明書以
www.germanpool.com
網上版為最新版本。
Refer to www.germanpool.com for the most up-to-date version of the user manual.
現象
Phenomenon
檢查要點
Possible Cause
處理方法
Solution
顯示錯誤代碼E0
Displays error code E0
加熱區沒有鍋具或鍋具不適合電磁
爐加熱。
No utensil detected in any heating
zones or the utensil is inappropriate
for the appliance.
選用適合的鍋具。
Use appropriate utensils.
顯示錯誤代碼E1
Displays error code E1
IGBT過熱或熱敏電阻損壞。
IGBT overheated or heat sensitive
resistor malfunctioned.
確認吸氣和排氣口暢通，讓電磁
爐冷卻幾分鐘，如果電磁爐錯誤
代碼顯示仍然存在，請聯繫零售
商進行檢查。
Ensure the air inlets/ outlets are
clear. Let the appliance cool down
for several minutes. If the error
persists, contact customer services
for checking.
顯示錯誤代碼E2
Displays error code E2
傳感器損壞或是乾燒保護（一般情
況下是乾燒保護）。
Sensor malfunctioned or overheat
protection activated (normally the
latter).
移開鍋具，冷卻電磁爐，如果電磁
爐錯誤代碼顯示仍然存在，請聯繫
零售商進行檢查。
Remove the cooking utensil, cool
down the appliance. If the error
persists, contact customer services
for checking.
顯示錯誤代碼E3
Displays error code E3
底壓或高壓衝擊電流保護。
Over-voltage or under-voltage
current protection.
檢查輸入電壓是否正常，如果正常
的情況下，電磁爐錯誤代碼顯示仍
然存在，請聯繫零售商進行檢查。
Check that the voltage input is
normal. If the voltage input is normal,
and the error persists, contact
customer services for checking.
