Operating Instructions
P.9
Notice Before Use
P.8
Operating Instructions
Sensitive Touch
Your ceramic glass cooktop is equipped with electronic controls and sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a control light, a letter
or a number on the display and/or a “Beep” sound.
For normal use press only one key at the same time.
Before The First Use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergents which risks
causing blue-tinted colour on the glass surface.
“SLIDER” Zone And Timer Setting zone
To select the power with the slider, slide your finger on the “SLIDER” zone. You can also have direct access if
you put your finger directly on the chosen level.
Display Indication
“SLIDER”zone and timer setting zone
“SLIDER”
Direct access
Starting-Up
Residual Heat Indication
After switching off a heating zone or the complete stop of the hob, the heating zones can be hot from the used
pots and pans. The cooktop will indicate [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don’t touch the heating zones and don’t put any heat sensitive
object on them.
There are risks of burn and fire
.
Power Booster
The Booster function allows you to boost the power of the selected cooking zone for a maximum of 5 minutes.
Display
Designation
Function
0
Zero
The heating zone is activated.
1…9
Power level
Selection of the cooking level.
P
“Power”
Booster function is activated.
E
Error message
Electronic failure.
H
Residual heat
The heating zone is hot.
Lo
Child Lock
Control panel locked.
U
Keep warm
Maintain automatically of 70°C.
U
Pot missing
No suitable pot detected.
Start up / switch off the hob:
Action
Control panel
Display
To start
Press key
2 x [ - ] are displayed
To stop
Press key
Nothing or [ H ]
Start up / switch off a heating zone:
Action
Control panel
Display
Zone selection
Press selected zone
[ 0 ] is blinking
To set (adjust the power)
Slide on the “SLIDER” or press [ + ] and [ - ]
[ 0 ] to [ 9 ]
To stop
Slide to [ 0 ] on “SLIDER” or press [ - ] until [ 0 ]
[ 0 ] or [ H ]
If no action is made within 5 seconds the electronic returns in waiting position.
Activating the booster function :
Action
Control panel
Display
Zone selection
Press selected zone
[ 0 ] is blinking
Activate booster function
Press key
[ P ] is displayed on the selected zone
Deactivating the booster function :
Action
Control panel
Display
Zone selection
Press selected zone
[ P ] is blinking
Deactivate booster function Press key
[ 9 ] is displayed on the selected zone
