German Light Products JDC1, User Manual

Page: 8 / 72

www.glp.de
8 JDC1
User Manual Rev. 3.0
•
The warning below is printed on the product. If the warning becomes impossible to
read, replace it with a label reproduced from this illustration:
•
Provide well-lit conditions to reduce the pupil diameter of anyone working on or
near the product.
Strobe safety
•
Flashing light, particularly at 5 - 30 Hz, may cause seizures in persons with
photosensitive epilepsy. Do not use strobe effects for extended periods.
•
Comply with local regulations on the use of strobe lighting and notify the public in
advance with highly visible warning signs when strobe effects are used.
•
If a seizure occurs, stop using strobe effects. Seek professional medical help. Note
the time that the seizure starts and finishes. Call emergency medical help urgently if
the seizure lasts more than five minutes, if it is the person’s first seizure, or if the person
is injured. While waiting for help to arrive, consider the following general advice for
caring for a person who is having a seizure: Protect the affected person from injuring
themselves on hard or sharp objects. If necessary, move the person to a safe place.
Lay them on their side with their head supported to prevent it from hitting the floor.
Loosen any tight clothing around their neck. Do not use force to hold the person or
restrict their movements. Do not put anything in their mouth, including your fingers.
Installation safety and protection from personal injury
•
Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.
• The product is not portable when installed.
•
Ensure that the supporting structure and installation hardware used can hold at least
10 times the weight of the load that they support.