w
w
w
.g
er
at
h
er
m
.c
o
m
13
Prior to starting up, Geratherm UniqueTemp° must be as-
sembled in such a way that it is safe to operate.
Assembly variants
The holding claw (Fig.
2) can be used to fas-
ten the control unit to
IV poles (Fig. 1-a) or to
suitable rails on equip-
ment. The unit can also
be placed on an equip-
ment rack (Fig. 1-b). The control unit must be positioned
on a non-slip surface.
Holding claw
The holding claw fits all
IV poles with round po-
les ranging in diame-ter
from 15 mm to 25 mm.
The holding claw can be used to attach the control unit at
variable heights and angles (see Fig. 3).
Attachment
Attach
the
holding claw
to the pole of
the IV poles as
shown in Fig.
3 and fix the
position using
the adjusting
screw (Fig. 2-
B). Push the
control unit by
means of the
handle onto
the attachment on the holding claw (Fig. 2-C) and secure it
using the knurled-head screw (Fig. 2-D), (Fig. 3-2). Once
the control unit is securely placed in the attachment, its an-
gle can be adjusted as required (Fig. 3-3) and fixed using
the knurled-head screw (Fig. 2-E).
5 Starting up and operation
5.1 Assembly and installation
