w
w
w
.g
er
at
h
er
m
.c
o
m
17
5.6 Switching off the warming
blankets
Using the slider, the blanket temperature on the control unit
is set at less than 30.0°C. Then the blankets on the display
appear in blue and lines appear instead of the number indi-
cating the temperature setting for the blankets. Confirm by
touching the “
OK
” button.
•
Please note:
The time required for raising the tempe-
rature of the warming blankets from 20 °C to 37 °C is
approx. 8 minutes.
After a power cut, the above temperature setting pro-
cedures need to be carried out again.
5.7 Preselection of temperatures for
individual blankets
After the control unit is switched on
and the testing of the safety sys-
tems has been carried out, all the
blankets are switched off (depicted
in blue). The warming blankets are
switched on by touching the “
OK
”
button. If you would like to set dif-
ferent temperatures in the various warming blankets, press
the “
select
” button area in the bottom right-hand corner
of the display.
In this mode, each blanket is ac-
tivated separately as follows:
1. Touch the graphical representa-
tion of the temperature.
2. Set the temperature by means
of the slider or “+” and “-“ .
3. Confirm the selected temperature
by touching the “
OK
” button.
If the “
OK
” button is not touched, after 5 seconds the con-
trol unit will restore the settings that existed prior to the
change.
