34
GB
Please clean your device after each use according to the
instructions below.
Note:
After two uses (inhalations) please rinse the neb-
ulizer with water by
fi
lling the medication cup with water in
order to clean the membrane.
Before Cleaning
Make sure that the nebulizer is turned off before disas-
sembly.
1. Remove the unit lid, mask,
mouthpiece and adapter from
the unit. You could remove
the adapter from mesh cap
by slightly turning in clock-
wise direction.
2. Remove the mesh cap by gently pressing the
fl
ap and
lifting up in the direction indicated the arrows.
3. Discard any remaining medications (pay attention to
statutory provisions).
Cleaning and Disinfection of Nebulizer Parts/ Accessories
Cleaning after every use
Clean the mask, mouthpiece, unit lid, adapter and
mesh cap after each use.
1. Disassemble the components from the unit.
2. Rinse all above-named parts under a small stream of tap
water.
3. Gently wipe off excess water with
a clean dry cloth and allow to air
dry. Possible remained drops on
the mesh surface could remove by
easy shaking of mesh cap.
Cleaning and Disinfection
1
2
