37
GB
Measuring blood pressure
a. After your body is in a comfortable
position, press the “START” button.
After a long “beep”, BPM will verify
itself with LCD display all automati-
cally, and the COLOUR CHANGE
LED will lighten with 3 colours by
turn (picture 1).
b. Then the LCD twinkle the current group sign and show
the total of memories in this group. Now you can mod-
ify the current group number by pressing the “START”
button, and con
fi
rm the current group by pressing the
“MEM” button.
pic. 1
Operations
3. Manual Clock Adjusting
Normally, the time and date can be adjusted by RCC
signal automatically. But you also can try manual clock
adjusting if no RCC signal or weak signal.
a. When the machine is in Clock Mode, press the “START”
and “MEM” button at the same time (abt. 2 sec.), the
machine enters Forced RCC Receiving mode, then
press “START” button, the machine enters manual
Clock Adjusting Mode.
b. The number of year will twinkle
fi
rst. Press “START”
button continuously, the numbers of month, day, hour
and minute will twinkle in turn. While the number is twin-
kling, press “MEM” button to increase the correspond-
ing number. Keep on pressing the button “MEM”, the
number will increase fast.
c. You can exit the Clock Adjusting Mode by pressing but-
ton “START” when the number of minute is twinkling,
then enter the Clock Mode.
d. When you change the batteries, the clock will be reset.
You can readjust clock or let the monitor modifying the
clock by RCC automatically.
