User Manual
Diffustik
DIFFUSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Page 10
At last connect the gas sample hose (1) with the Luer Connection of the
closing head and after that the gas supply hose (2) with the compressed
air supply of the stand.
Ensure that all connections are connected accurately
and without too much power.
The gas supply hose must only be connected to gas
bottles with the following content:
-
up to 0.3% CH4
-
up to 0.3% CO
-
up to 0.3% C2H2 (optionally)
-
21% O2, rest N2
Open the gas bottle carefully after all connections have
been established like described.
2.2.4
Flow sensor installation
Open the cap of the sensor attachment and carefully plug the flow
sensor in its designated adapter (1). Ensure that the sensors connection
2
1
