Instructions for Use
Bodystik
Serial no.: xx|8|301|yyy and 2301xxxxx
Version: 7 | Release date: 02. August 2021
Page 69
3.
Insert the power supply of the
equipment cart into the power
socket.
4.
Turn on the equipment cart
with the On / Off switch
Display "Power Supply" of the
equipment cart lights up
If the corresponding power supply
unit is connected:
•
The LED Display "Power
Supply" on the connection
panel lights up.
•
Bodystik is ready for
operation.
Only after a new calibration is the Bodystik ready to operate
again. see also:
•
Chap. 7.3 "Calibrating Bodystik".
•
Separate IFU
o
Flow Sensor Calibration
o
Calibration Bodyplethysmograph
