![background image](http://html1.mh-extra.com/html/gera/ladybird-i/ladybird-i_service-manual_2216130042.webp)
Ladybird Folder
03-Mar-2014
Service Manual
6-9
GENERAL
PROCEDURE
Change Tag Index
Introduction
The purpose of this section is to provide a listing of the significant changes made to the Folder that
changed the form, fit, function, and/or serviceability of the Folder,
A TAG number identifies all significant changes or modifications. A TAG number may be required to
identify differences in diagnostic, repair, installation, or adjustment procedures. A
TAG number may
also be required to identify the presence of optional hardware, Firmware or if mandatory modifications
have been installed.
Throughout this manual, changes are identified as (W/ Tag)
With TAG
or (W/O TAG)
without TAG.
For example: Step 4 (W/ TAG 07): Remove the baffle. When servicing a Folder with TAG 07, you must
remove the baffle. Step 4 (W/O TAG 10): Install the support arm. When servicing a Folder without
TAG 10 you must install the support arm.
•
Every TAG number is listed with its number:
TAG:
•
The “CLASS” specification:
CLASS:
That can be
N/A: Not applicable Retrofit
If a particular modification cannot be installed on some previous folders
MA: Mandatory
If the modification is necessary for many folders
R: Repair
If with the modification the folder must be adjusted differently
S: Safety
If the change made increase the folder safety
O: Optional
If the modification is not necessary and can be installed by CSE choice
•
The serial number of the folders that mount the
modification
MFG SERIAL N°:
•
The TAG name:
NAME:
•
The TAG Purpose:
PURPOSE:
•
The KIT number, if the TAG parts are grouped in a
KIT
KIT NUMBER:
•
The part list with the parts that compose the TAG
REFERENCE:
TAG:
01
CLASS:
O
MFG SERIAL N°:
860010010
NAME:
C1C – CC distance.
PURPOSE:
Improve the ansa and get a better infeed through steel ball instead of rollers.
KIT NUMBER:
NA
REFERENCE:
NA
TAG:
02
CLASS:
O
MFG SERIAL N°:
860010010
NAME:
Electric No Fold switch
PURPOSE:
Improve the folder using for No Fold get better and the Copy Infeed
KIT NUMBER:
NA
REFERENCE:
NA
TAG:
03
CLASS:
O
MFG SERIAL N°:
860010070
NAME:
Infeed Group
PURPOSE:
Folder Infeed Group modified to improve the folder entry; added an external
wheel for an easier jam removing.
KIT NUMBER:
NA
REFERENCE:
NA
TAG:
04
CLASS:
O
MFG SERIAL N°:
8600100??
NAME:
New Paper infeed rule with more longest tabs
PURPOSE:
90 gsm paper rolls are too curled at the end of paper and this new item drive
paper to the exit without jams
KIT NUMBER:
G860319X
REFERENCE:
NA
TAG:
05
CLASS:
O
MFG SERIAL N°:
8600100??
NAME:
Printer white plate
PURPOSE:
Improve the paper exit when it is too curled and jams
KIT NUMBER:
G952311X
REFERENCE:
NA
TAG:
06
CLASS:
O
MFG SERIAL N°:
8600100??
NAME:
Micro Switch
PURPOSE:
Replaced the CT cut sensor that created problems as tear paper
KIT NUMBER:
NA
REFERENCE:
NA