![background image](http://html1.mh-extra.com/html/gera/ladybird-i/ladybird-i_service-manual_2216130041.webp)
Ladybird Folder
03-Mar-2014
Service Manual
6-8
GENERAL
PROCEDURE
Folder Firmware Upgrade / Adjustment
Download the GERA UTILITY 2.5 from GERA web site and install it
“
Download Utility Rel 2.5
”
Download the zipped file who contains defaults values ini file, parameters and firmware “
Firmware
Parameter and Ini 1.4
2”
Firmware Upgrade
-
On folder main Controller put the connector on J9
-
Switch off the folder
-
Run the utility 2.5 a butterfly tools window will be opened
-
Choose the right COM and press “download”
-
A second window will ask to press “start”
-
Switch on the folder
-
If connection is complete it will ask to press “Program”
-
Choose the appropriate firmware downloaded previously.
-
After finishing the firmware upgrading Switch off/on the folder:
If one green LED is lit on, the upgrading was successfully done
If two LED is lit on, do the upgrading procedure again
Folder Adjustment
-
Connect the USB serial cable to the P5 folder serial port
-
On main Controller put the connector on J7
-
The folder must be On.
-
Run the utility 2.5
-
Choose the right COM and pres “Start”
-
On butterfly tools windows appears the model and “Trim” and
“Test” will be activate.
-
To adjust panel values press “Trim”, choose the appropriate
file
.ini
downloaded previously
-
A Butterfly Trim window will show the property name of even adjustment, the folder values
and the defaul value saved on ini file.
After each modification it is necessary to press “Save All”
INSTALLATION
For the Ladybird Folder Installation Procedure refer to the document
IS 860-001 Ladybird installation
instruction;
download it from GERA website reserved area or ask GERA service support