GERA GeraFold 206, User Manual

Page: 13 / 70

Mar .2018 GeraFold User Manual 13
Control Panel
User Interface Gerafold 206
The Gerafold 206 control panel contains two buttons and three indicator lights:
Red LED on, by pressing for a long the arrow key it
performs the paper jam ejection, the engine pushes the
paper out from the folding pocket where the sensor is
covered.
Red LED on but by pressing the arrow key it does not
activate the engine movement, this means that paper jam
is located at the folder entry and must removed by pulling
back the copy by hand.
The circular button when pressed during the introduction
or the folding process, stops the engine movement, in case
of failure or red LED On, it operates as a logic reset and
verification status of the folding machine.
The arrow key can be used for changing the panel
dimension or for the paper jam ejection procedure (in case
of red led on)
The Green light indicator shows the number of
millimetres added or removed to the actual 1
st
panel dimension value
Fixed led means
increasing 1
st
fold panel
dimension, each press
will add 1 millimetres.
Flashing led means
decreasing 1
st
fold panel
dimension each press
will
remove 1
millimetres.