Ger Detect FRESH RESULT 2 SYSTEMS PLUS, User Manual

Page: 19 / 22

“Important information and notes”
✓
the Salinity of the water is to Measure the percentage of the Salts in the water
✓
When you see the depth in the results, for example: ( 110-130 meters) and you research again and
give you, for example, ( 120-160 meters) or ( 40-170 meters) for example, that is mean there is more
than 1 water well under the ground (there are several Water wells with different depths at the same
place)
✓
if you made several search in the same place and the depth was similar in all the times that is mean
there is an underground water leak and not stream water
✓
If you want to confirm the target once again in the same place, you must take out the probes and
change the place of the probe to other place at least one meter far a way to remove accumulation of
charge as a result of the passage of the stream
✓
You should avoid using the machine during rain and must wait for 15 days at least after the rain
stopped until the soil dry out then you can use the device
NOTE:
✓
Suppose the existence of drilled water wells in your area and working well and
starting at depths of 10 meters or 50, 100 or 120, 140, meters etc. ...... this is not
conclusive evidence that the water existence only on these depths. It could be
there is a water at more depths.
That means the final result of depth on the device screen is the real depth of huge
amount of water.
Example: If it is proved you through the search process device that the depth of
this places from 200 to 240 meters this indicates that the existence of water is
truly at these depths.
As for the drilled wells and works depths less than 200 meters with very short life,
so must re
- restored and drilling to the depth that the device showed.