“Important information and notes”
✓
If the device displays the results
“no water”
in the search this will means two different things
o
1- Could be the cable not connect correctly between the main unite and the probs.
o
2- could be the device had detected very salty water.
✓
The difference that appears in the depth of the water (such as
80 > > 154
) Represents the surface
and the bottom of the discovered water.
✓
If you will use a different battery charger, preferably you should use
12 to 15
v no more and no
less, and the value of Ampere is
(2)
and if you will use a charger with higher or lower Ampere it
will make your battery last lower than normal.
✓
The distance between the 4 probes should be at least 20 meters to get more accurate result.
✓
If the distance between the 4 probes is
20
m each you have to adjust the distance in the sitting.
✓
If the device gives you on the screen (few data) you should do the search again in the seam
location.
✓
If the density of the water lower than
50 %
that means the water exist in small quantity in this area
and it’s not recommended to drill according to this result.
✓
If the density of the water is from
50 % to 60 %
that means the water exist in medium quantity
✓
If the density of the water is from
70 % to 80 %
that means the water exist in big quantity
✓
If the density of the water is from
80% to 100%
that means the water exist in very big quantity
✓
When the device discovers salty water the result will be on the primary result of the search it will
show
(salty water)
✓
When the device discovers very salty water the result will be on the primary result of the search it
will show
(very salty water)
and this water is Non-drinkable and Not usable
Summary of Contents for FRESH RESULT 2 SYSTEMS PLUS
Page 1: ......
Page 22: ...4 Probes x 45 cm External rechargeable battery...
