Administrator Mode
35
4
4.4 Monitoring
You can start recording manually, by schedule or by input trigger.
Figure 4-18
[Manual]
Manually activate recording and I/O monitoring.
Select all:
Select all options to start recording and I/O monitoring as well.
Camera 1, Camera 2:
Manually start recording. Select the desired camera(s) and the
recording mode for recording.
Input:
Manually start I/O monitoring. When the input(s) is triggered, its associated
cameras and outputs will also be enabled for recording and alerting. For input settings,
see
4.2.2 Input/Output Settings.
[Schedule]
The system starts recording and I/O monitoring based on the schedule you set.
For schedule settings, see
4.5 Recording Schedule
.
[Start/stop monitoring by Input X]
Start and stop monitoring by the input assigned.
When the assigned input is triggered, the system will response based on your recording or
I/O monitoring settings in above
Manual
or
Schedule
options.
[Camera Status Icon]
:
Manual recording
:
Schedule recording
:
On standby
:
Enabled for motion detection and input trigger
Summary of Contents for VSV13-A-EN
Page 1: ......