58
5.5 Playing the Project on PN300, PN400 or SQP133
To play the project, created using the Content Designer, on the PN300 / PN400 / SQP133,
follow the steps below:
To create a folder:
1. Create a folder named
Scenario
in a USB storage device or an SD card. If you like to play
multiple projects repeatedly, create a folder named
Loop_Scenario
.
2. Copy the project files to the
Scenario
folder. Or copy multiple Scenario folders to the
Loop_Scenario
folder.
To turn on the device:
3. Connect the USB storage device or the SD card to the device.
4. Turn on the monitor and the device.
5. For PN300 / SQP133:
z
The local storage is set to the SD card by default. If you are using an SD card, the
device will repeatedly play the files at this step.
z
If you are using a USB storage device,
select
Play Source
and select
USB
to
be the storage.
6. For PN400:
The local storage is disabled by default. To select a storage device, select
General
and select
SD
or
USB
.
7. Press
Back
on the IR remote control to return the menu, and press
Back
again to start
playing.
Note:
1. You can only store one project in the
Scenario
folder. If multiple projects are saved in the
Scenario
folder, the device will only play the last project. To play multiple projects, you
can create a
Loop Scenario
folder or set up a schedule by using the Content Schedule
software. See
Chapter 6 Content Schedule.
2. The device will only play the files stored in the
Scenario
folder if both the
Scenario
and
Loop_Video
folders are in the storage device.
