Getting Started
21
3
The GV-Hot Swap Surveillance System V5 will run a series of self-tests, and later series of
messages may be displayed as the various hardware and software subsystems are activated.
After this is finished,
GV-Hot Swap NVR System
pops up GV-IP Device Utility to detect IP devices under the
same LAN. To add an IP camera to the system, see
Adding IP Video Devices,
Chapter 5,
in the
Quick Start Guide
.
GV-Hot Swap VMS System
pops up the Automatic Setup dialog box. To add an IP
camera to the system, see
Adding IP Cameras to GV-VMS
, Chapter 6, in th
e Quick Start
Guide
.
GV-Hot Swap Recording Server System
pops up login Web interface. See Chapter 7 in
the
Quick Start Guide
.
Note:
1. The series of self-tests will take around 20 seconds to 2 minutes, depending on the
number of installed hard drives.
2. For 4U (20-bay) and 3U (16-bay) models, the Power LED and the LEDs of HDD Groups
A to D should shine after power is on. If any of HDD Group LEDs does not shine, please
contact GeoVision.
