June 26, 2018
14
7.4 Other Setting
In the left menu, click
Other Setting
. This page appears.
[Device ID]
Indicates the current ID of the device.
[Connection to IO-BOX]
Select
Enable
to use GV-I/O Box through a network or select
Disable
to use GV-I/O Box through USB or RS-485 connection. GV-I/O Box cannot support
more than one method simultaneously.
[Communication Port]
Keeps the default port value
10000
.
[Mac Address/Firmware Version]
Indicates the MAC address of the network medium and
the Ethernet module version of GV-I/O Box.
[Reboot System/Set Default]
Reboot System:
Performs a warm boot of GV-I/O Box. This operation keeps the
current configuration.
Default Value:
Resets all configuration parameters back to factory settings. This may
take 5 seconds to complete.
Note:
If you switch the connection from USB or RS-485 to network, first remove the USB or
RS-485 cable from GV-I/O Box before selecting
Enable
in this setting page; otherwise, the
network connection will not function.
