Basic Operations
27
The electronic compass is able to provide the accurate direction for user even with poor
satellite signals or in low-speed or static status.
Restoring WinCE System
Make sure the backup of software and data
have been done before restoring WinCE
system.
In the power off status, keep pressing the
“OK” button and press the power button until
the handheld turns on and the interface of
“Restoring the system, please wait…” is
shown as right:
This operation will restore all data and settings to the initial status of handheld except
Micro SD. Please note: the software GeoPac will be deleted. Reinstallation is required to
perform any field work.
Warning:
To avoid data loss, please do not try this operation if it’s not necessary. Make
sure the backup of software and data have been done before this operation.
