POWERING ON THE HANDHELD
The HHT handheld requires a special sequence to turn on to
ensure all buttons are working correctly prior to start up, and
minimize any accidental powering up of the handheld.
To power up the HHT:
•
Press and hold the
RED BUTTON
•
Press and hold the
GREEN BUTTON
•
Release the
RED BUTTON
•
Release the
GREEN BUTTON
Regular flashing
GREEN LED
:
System turned on but no link.
Solid, or short flashes of
GREEN LED
:
System turned on and linked.
MATCHING INSTRUCTIONS
FIRST METHOD
1. Turn off the HHT
2. Apply power to the C220.
3. Momentarily (“blip”) the power off to the C220 six to seven
times (i.e. power off for 1/2 second, power on for one sec-
ond; six times). Leave the power on after the sixth blip.
4. The LED on the C220 will light up
DARK BLUE
.
5.
Continue with steps five to eight below in second method.
HHT Handheld
Quick Start Guide
Aarcomm’s HHT Handheld Quick Start Guide provides
support for the following items, included in your HHT
remote control system:
•
HHT handheld
•
C220/C200 receiver
•
Antenna
•
Charging cradle
•
Wiring harness
