© 2022 GeoSLAM Ltd 9 ZEB Vision User Guide v1.0
4.2. Collecting Data
The ZEB Vision camera will be powered by the ZEB Horizon system. Ensure the camera is fully connected before
powering on the Horizon system, otherwise it will not be detected and no images will be captured. Once the ZEB
Horizon initialisation process has been completed successfully, images will begin to be taken.
The LED on the camera will be illuminated green when powered on.
For best practices on capturing data for colourisation, please consult the guidance outlined on
4.3. Downloading Photos
Insert one end of the ethernet cable into the back of the ZEB Vision camera and secure by tightening the screw. Insert
the other end of the cable into a PC which has the GeoSLAM Connect software downloaded.
4.3.1 Establishing a Connection
The Vision camera has an IP address of 192.168.0.206.
Navigate to Control Panel\Network and Internet\Network Connections.
Right click on the port connected to the camera and select
‘Properties’.