manualshive.com logo in svg

GeoSlam K GS ZEB VISION, Hardware User'S Manual

Share
Download
GeoSlam K GS ZEB VISION Hardware User'S Manual Download Page 9

 

 

© 2022 GeoSLAM Ltd                                                  8                                     ZEB Vision User Guide v1.3 

 

 

4.  Appendix 

4.1.  APPENDIX A 

– Scan Head Firmware Update 

When retrofitting a ZEB Vision to an existing ZEB Horizon, a new version of firmware is required to send the 
necessary commands and timing information to the camera for synchronisation. 

Once this version is installed, the ZEB Horizon will always assume a Vision camera is being used. Therefore a 
ZEB Cam cannot be used unless the firmware is downgraded. A future update will allow for the detection of each 
camera. 

Please follow the steps relating to the appropriate iteration your ZEB Horizon datalogger. Information on how to 
distinguish which generation of datalogger you have, please consult 

GeoSLAM Academy

. 

 

4.1.1.  ZEB Horizon Generation 1 Datalogger 

 

1.  Ensure all data files have been removed from the datalogger 
2.  Download the firmware upgrade files to your machine 
3.  Insert the USB 3.0 drive into your machine 
4.  Transfer the firmware upgrade files onto the USB 3.0 drive, then remove the USB from your machine 
5.  Power on your ZEB Horizon datalogger and wait for the status LED light to pulse red 
6.  Insert  the  USB  into  the  datalogger.  The  data  LED  will  illuminate  green  to  show  the  transfer  of  the 

firmware upgrade files 

7.  Once the data LED light has switched off, remove the USB and power off the datalogger 
8.  Connect the ZEB Horizon scanner to the datalogger using the main cable and power on the system as 

normal 

9.  After flashing blue, the datalogger status LED will flash red and the scanner LED will illuminate orange 

during the update. Once complete the system automatically powers off. 

10. Wait  10  seconds  before  powering  on  the  system  again.  The  system  should  now  complete  the 

initialisation process and have the latest firmware installed 

11. You may download system log file to check the firmware upgrade has been successful. 

 
 

4.1.2.  ZEB Horizon Generation 2 Datalogger 

 

1.  Make a network connection between the PC and the datalogger as outlined in the ZEB Horizon User Guide 
2.  Download and open the Gen 2 Datalogger Control Tool from 

https://geoslam.com/getting-started-zeb-vision/

. The 

following screen will appear. 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for K GS ZEB VISION












Reviews:

No comments

Brands by name

Popular brands

Load more brands