- 2 -
3. Connect the Motor to the receiver via coaxial cable. The Green LED will light to indicate that the
motor is receiving power from the receiver.
.
II. Quick Installation (A receiver with Goto X Function or USALS compatible):
1. Set the Angle of the motor:
Set the Motor Angle Scale to match the installation location Latitude.
2.
Mount the Dish:
Find the Dish Angle Settings on Page 6 of this manual.
Set the Dish Angle using the elevation scale on the antenna dish.
Motor Angle Setting Disk Angle Setting
http://www.geosatpro.com
