12
Operations
Operations
Operations
13
Operations
6.1
͊
Press MENU key and position cursor on ‘Language' column with
or
.
͋
Select language you want with or .
VOL
VOL
CH
CH
͉
Press POWER on remocon, the LED number will be displayed as follows;
After your receiver is powered up, proceed with installation as follows:
1. Menu Language Setting
͈
When you plug in AC power, the following will be displayed on the front.
2. Help
If you want to know how to use current part in the menu, use ‘help' function.
͈
Select a content in the menu.
For example, if you want to know about the installation menu, select installation.
͉
Press INFO. Then you can see the help window of the selected content.
͊
Select the Satellite you want to add with
or
and press or .
͋
If you press
, the selected Satellite will be added and the cursor will move to right
window for detailed installation.
VOL
VOL
CH
CH
ҫ
ҫ
Note : Enter 4-Digit password if need arise. The default password is ‘0000’.
6.1
3. Satellite Setting
Since your receiver has the basic data of most satellites and channels, you can receive
programs just by plugging in. But, according to the status of your antenna setup, you
may have to modify the basic data of satellites and / or channels.
When you need to modify the data, proceed as follows ;
͈
Press MENU key and position the cursor on Installation column with
or
and
press .
͉
By using
or
, select ‘LNB Configuration’ and press .
CH
CH
CH
CH
