Operations
39
Operations
38
Operations
Operations
͒
Press MENU, EXIT or to
finish GUIDE menu.
ҫ
ҫ
Note : 1. Without 'STATUS' being actuated (Yes), 'Timer' does not work.
2. If a program of prior time than current time ('Local Time' in 'System Parameters' menu) is
selected, Timer does not work.
3. Refer to 'Setting Timer' in 'System Parameters' in this manual.
͑
Press
to save the new ‘Timer' setting.
6.7
3. Subtitle/Audio
You can adjust the subtitle and audio condition/status of the current channel.
͈
Press ‘AUDIO’ and subtitle and audio related window will be displayed on the screen.
-Subtitle On/Off
Subtitle Track
Audio Track
Audio Mode
Dig.Output
2 of 10 [Swedish]
1 of 8 [English]
Stereo
Non-compressed
Subtitle/Audio
͉
In this example, program spoken language is ‘English' and user's selected subtitle
language is ‘Swedish'.
6.7
The contents of each parameter are as follows ;
Subtitle Track
(Subtitle language #) of (all subtitle language available in this
program) [Current selected subtitle language]
Audio Track
(Audio track #) of (all tracks available in this program) [spoken
language in this program]
Audio Mode
Stereo
ƍ
Mono-Left
ƍ
Mono-Right
Dig.Output
Non-compressed / Compressed
ҫ
ҫ
Note : These subtitle and audio parameters are workable only when the receiving channel
supports these functions.
ҫ
ҫ
Note : 1. You can set SLEEP TIMER in 30 minute steps up to 150 minutes.
2. The SLEEP TIMER does not work while you are in ‘MENU’, ‘GUIDE’ or ‘CHANNEL LIST’.
4. Sleep Timer
Your receiver will automatically power-off when the time you set is passed.
Press ‘SLEEP’ key until the right time you want appears.
