16
Operations
Operations
Operations
17
Operations
͍
Select the satellite name you want with or .
VOL
VOL
͎
If you press
, the selected satellites will be scanned.
͏
While scanning, you can see the following menu on the screen.
͐
After the scanning process, the first channel of the last scanned TP will be displayed on
the back screen.
͑
Press
to finish the process. Then select a channel and press
to watch a
program or press MENU key or EXIT key.
ҫ
ҫ
Note : Now you have completed all steps needed for watching programs. If you could not see the
program after finishing these procedures, please contact your engineer or representative.
6. Select Channel
You can change the current channel to any other channel you want.
͈
In the right section, detailed information of the selected channel will be
displayed.(Name of satellite, frequency, symbol rate, etc.)
͉
Select the channel you want with
/
(scroll up/down) or /
(page up/down).
͊
When the scroll bar is positioned on the channel you want to see, press
.
VOL
VOL
CH
CH
͉
When necessary, press MUTE key to remove the sound of the program temporarily.
Then, your receiver goes into mute condition and the volume bar will become red.
Press MUTE key again to turn the sound on.
7. Volume Control
͈
While you are watching a program, press or
to control volume of the current
channel.
VOL
VOL
6.1
6.1
