Using your coffee grinder
IMPORTANT:
Ensure the coffee grinder is on a flat, level and stable surface in
easy reach of a power socket.
1.
Remove the lid from the top of the coffee grinder.
2.
Do not operate the coffee grinder for more than 30 seconds, allow
3.
Place the lid back onto the coffee grinder. Ensure the tab on the lid is aligned
with tab socket on the motor base.
4.
Slot the plug into the power socket and turn the power on if required.
5.
IMPORTANT:
the grinder to cool down for 3 minutes before using again.
6.
After you have finished grinding, always remove the plug from the power
socket.
IMPORTANT:
If you want to remove the lid to check the consistency of the
coffee grounds, always wait until the blades have stopped rotating.
7.
Lift the lid off the motor base and pour the ground coffee out. Do not leave
ground coffee in the grinder.
IMPORTANT:
Always clean your coffee grinder after use.
Fill the grinding chamber, ensuring the beans do not exceed the level of the
inner metal chamber (MAX approximately 36g).
Push down on the black tab on the lid to start grinding. Lift your finger off
the tab to stop grinding.
5
Preparing your coffee grinder
1.
Remove all packaging and dispose of it.
2.
Remove the tape holding the lid on and dispose of it.
3.
Remove the lid by pulling upwards off the motor base.
4.
Wash the lid in hot soapy water then dry thoroughly with a cloth.
5.
Wipe the inside of the grinding chamber of the motor base with either a
damp lint-free cloth or a sponge. Take care as the grinding blade is sharp.
CAUTION:
Never immerse the motor base in water or fill the grinding
chamber with water for cleaning.
IMPORTANT:
Ensure all parts of the coffee grinder are dry before using. This
prevents the coffee grinds clogging the grinder.
George GCG101-20 Coffee Grinder.indd 5
14/05/2020 08:42
