Geonics Limited EM61MK2A, Operating Instructions Manual

Page: 9 / 62

5
EM61MK2 Data Logging System (DAS70/61MK2)
Set Output Port
This menu allows to disable and enable optional output to other devices.. This menu is
also used to set the format of the output string, serial port number used for output, and to
specify necessary serial port communication settings.
Advanced COM Setup
This option allows you to set address and interrupt level for each used serial port. These
parameters are necessary if more than two serial ports are used during data collection.
File Manager
This option contains three following items listed in File Manager menu:
Upload Files
This option allows to upload recorded data files to a PC computer running
DAT61MK2 program.
View Files
The program will display list of available data files that can be reviewed.
Delete Files
This option allows to delete permanently not needed data files from the field
computer disk.
Exit
Selecting this option will terminate the program execution.
6. Antenna Size Menu 6. Antenna Size Menu
6. Antenna Size Menu 6. Antenna Size Menu
6. Antenna Size Menu
The Antenna Size menu allows to select the size of the EM61-MK2 sensor. If the EM61HH-MK2
Hand Held antenna is used this option can be ignored. If the standard antennas are used (1 x 0.5 m,
1 x 1 m, or 05 x 0.5 m) the size of the sensor must be specified before monitoring the instrument
output. This menu is presented below.
To select proper instrument type use Up and Down arrow keys and when highlighted press
< ENTER >. The currently selected instrument type will be displayed in the top portion of most
menus.