6
Geonics Limited
7. Monitor/Null Menu
7. Monitor/Null Menu
7. Monitor/Null Menu
7. Monitor/Null Menu
7. Monitor/Null Menu
The Monitor/Null menu allows initial inspection of the range of the instrument readings at the
particular site, monitoring the instrument performance, quick inspection of the condition of the
instrument battery, and setting zero level of the instrument.
It is assumed that the instrument is turned ON prior to using this option. In case the instrument is
OFF or the instrument console is not connected to the computer the following message will appear:
Check the connection or turn the instrument ON and select the Monitor/Null option again.
Assuming that the instrument works properly the program will display Monitor/Null menu and
will start normalization session which lasts less than 10 seconds. At this stage the Monitor/Null
menu will display the following message:
After the normalization is finished the layout of the Monitor/Null menu is as follows:
Summary of Contents for EM61MK2A
Page 2: ......
