13
Upon entering this mode, the time is displayed and the number for the seconds will flash
to indicate that you have entered the setting mode.
Press
START/STOP
to set the seconds to 0
Press
SPLIT/RESET
to make the minutes flash
Press
START/STOP
to set the minutes
Press
SPLIT/RESET
to make the hours flash
Press
START/STOP
to set the hours
ATTENTION :
Going from the European display to an Anglo-Saxon display is done
when setting the time.
Press START/STOP to make the numerals scroll by
The possible values are:
You must therefore set the number for the hours in the appropriate system. The alarm time
will be adapted to the same format.
If the 12h mode is selected, the AM and PM symbols will appear, depending on the case,
on the left of the screen.
The modifications made to the alarm are automatically validated when you leave the mode
by the MODE button.
Contact
As we strive to continually improve the products we develop, we are interested in your
feedback regarding the quality, the functionality and the usage of our products.
• In France, please call the customer ser vice center at:
0810 08 08 08
(local call rate)
• For any other countr y, please leave a message under the relevant heading on
our website:
www.decathlon.com
We promise to answer you promptly.
60
22:01
ACC 70
M
69
8:00
ON
T1
AL-1
3.70
LAP 02
LAP
2.49
ALTI
ALTI
DATA 02
((
•
))
0-23 H (24h system) - - -> 12-11 A (12h system-morning AM) - - -> 12-11 P (12h system afternoon PM)
