18
5.4.1 Pairing
This procedure involves associating the sensor with its product. This does not need to be done
when you first use the belt as it is associated by default with your ONcoach. However, it is
recommended pairing when a battery is changed or for a new sensor.
5.4.2 Activation de la ceinture cardio fréquencemètre (Activation of the heart
rate meter belt)
This menu activates or deactivates your heart rate meter belt.
5.4.3 Paramétrage de l'accéléromètre (Configuring the accelerometer)
This menu activates or deactivates your accelerometer (optional). You can also calibrate it.
Calibration gives the most accurate measurement of speed and distance.
You can choose between 2 calibration modes: automatic or manual.
Automatic calibration
Make sure that your accelerometer is installed on the same foot as the one you used to calibrate.
To calibrate your accelerometer, a weighting coefficient must be entered. For this, you should do
a running distance for which you know the exact distance (a distance of at least 1 km ideally on
an athletics track).
To find out the weighting coefficient, do the following division:
Distance actually covered / distance measured by ONcoach = weighting coefficient
With automatic calibration, you only need to select the distance you wish to run and press on the
play/pause button, once the distance has been done.
The calculation of the weighting coefficient is done automatically.
Manual calibration
5.5
Date et heure (Date and time)
5.6
Auto power off
5.8
Système (System)
5.7 Écran de veille (Screen saver)
5.9
Paramètre d'usine (Default setting)
The date and time menu adjusts the date and time corresponding to your time zone.
Ensure that you set the date and time so that your sessions are transferred on the correct date
to your myGeonaute portal.
To save the battery, a screen saver can be activated.
This menu completely restores your ONcoach. Beware if you select default setting you will lose
all your settings.
The auto power off menu activates and sets the duration at which the product will automatically
go off when it is not being used.
This menu tells you which version of firmware your product has.
Summary of Contents for ONcoach
Page 1: ...leaflet ref xxxx xxx...
Page 2: ......
