Geometrics, Inc. G-824A Magnetometer Manual
37
+12V supply monitor display position (0=none,1=first,2=second..etc) : 0
+12V supply monitor display format :##.#
+5V supply monitor display position (0=none,1=first,2=second..etc) : 0
+5V supply monitor display format :#.###
+3.3V supply monitor display position (0=none,1=first,2=second..etc) : 0
+3.3V supply monitor display format :#.###
-5V supply monitor display position (0=none,1=first,2=second..etc) : 0
-5V supply monitor display format :#.###
Mag. supply monitor display position (0=none,1=first,2=second..etc) : 0
Mag. supply monitor display format :##.#
Hemisphere detector display position (0=none,1=first,2=second..etc) : 0
Hemisphere detector display format :##.#
Status display position (0=none,1=first,2=second..etc) : 3
Status display format :##
Include a CheckSum in the data :
(0=No 1=Yes ):0
Character to put before the checksum for ASCII data :*
Postamble for ASCII data :\r\n
Postamble for XS3 data :*
File (Safe default values) (Not saved)
S/N 824113 CM321 configuration Version 00.02
Mag Code Version: 01.00 Build Date: 8/29/2013 @ 18:11:31
A Assign file name B Baud rates C Cycle time
D Display all settings E Erase FLASH F Format of output
G Gate control I Input voltages L Load from FLASH
M Mode of operation N Next (multi systems) O Other devices
P Password R Run magnetometer S Save parameters
T Triggering
->
You can now type R to run the magnetometer and view the XS3 data being output at 1000
Hz. A description of the XS3 format (including decoding) is in section 7.4. The following
is an XS3 data example (note $=start,*=end).
$[ˆ9“63*$[ˆ9˜63*$[ˆ9›63*$[ˆ9œ63*$[ˆ9š63*$[ˆ9•63*$[ˆ9Š63*$[ˆ9Š63*$[ˆ9‹63*$[ˆ9•63*$[ˆ9£63*$[ˆ9¥63*$[ˆ9š63*$[ˆ9”63*$[ˆ9“
63*$[ˆ9•63*$[ˆ9•63*$[ˆ9”63*$[ˆ9•63*$[ˆ9˜63*$[ˆ9›63*$[ˆ9›63*$[ˆ963*$[ˆ9Š63*$[ˆ9ˆ63*$[ˆ9“63*$[ˆ9š63*$[ˆ9š63*$[ˆ9™63*$[ˆ
9—63*$[ˆ9Œ63*$[ˆ9‰63*$[ˆ9‹63*$[ˆ9“63*$[ˆ9•63*$[ˆ9˜63*$[ˆ9˜63*$[ˆ9˜63*$[ˆ9—63*$[ˆ9”63*$[ˆ9‹63*$[ˆ9Œ63*$[ˆ9–
63*$[ˆ9š63*$[ˆ9›63*$[ˆ9š63*$[ˆ9™63*$[ˆ9”63*$[ˆ9‰63*$[ˆ9Š63*$[ˆ9•63*$[ˆ9›63*$[ˆ9¥63*$[ˆ9¤63*$[ˆ9š63*$[ˆ9–
63*$[ˆ9‹63*$[ˆ9Š63*$[ˆ9”63*$[ˆ9™63*$[ˆ9¤63*$[ˆ9¤63*$[ˆ9›63*$[ˆ963*$[ˆ9“63*$[ˆ9Š63*$[ˆ9‰63*$[ˆ9Š63*$[ˆ9•63*$[ˆ9™6
3*$[ˆ9˜63*$[ˆ9”63*$[ˆ9‹63*$[ˆ9Œ63*$[ˆ9Œ63*$[ˆ9Œ63*$[ˆ9–63*$[ˆ9›63*$[ˆ9£63*$[ˆ9œ63*$[ˆ9–63*$[ˆ9Œ63*
Type S at this prompt to save these settings (type Y at both prompts as before to complete the save process)
Use backspace and edit this field to show ## (2
characters = 1 ASCII Byte in Excess 3 mode)
Use backspace and edit the display
position to 3
