Geometrics, Inc. G-824A Magnetometer Manual
30
After typing “F” at the configuration menu prompt you will see the following menu
items:
Specify the digital output RS-232 format.
The transmission order of the data source is controlled
by setting the "display position" in the following
table.
The format of the transmitted numbers is controlled by the
format control in the form "###.####". Only the digits you
specify are output, the others are ignored. For example,
15.62 formatted with "#.#" will produce "5.6".
Output format :
(0=ASCII 1=XS3 ):0
Put commas between numbers :
(0=No 1=Yes ):0
Remove unneeded spaces and zeros :
(0=No 1=Yes ):0
Master preamble :$
Slave preamble :,
Field display position (1=first, 2=second etc) : 1
Field display format :######.#####
Time display position (0=none,1=first,2=second..etc) : 0
Number of decimals in seconds : 1
Date display position (0=none,1=first,2=second..etc) : 0
Fid. number display position (0=none,1=first,2=second..etc) : 0
Fid. number display format :######
Signal display position (0=none,1=first,2=second..etc) : 2
Signal display format :##.#
Depth display position (0=none,1=first,2=second..etc) : 0
Depth display format :####.###
Altimeter display position (0=none,1=first,2=second..etc) : 0
Altimeter display format :####.###
ADC[3] display position (0=none,1=first,2=second..etc) : 0
ADC[3] display format :####.###
ADC[4] display position (0=none,1=first,2=second..etc) : 0
ADC[4] display format :####.###
ADC[5] display position (0=none,1=first,2=second..etc) : 0
ADC[5] display format :####.###
ADC[6] display position (0=none,1=first,2=second..etc) : 0
ADC[6] display format :####.###
ADC[7] display position (0=none,1=first,2=second..etc) : 0
ADC[7] display format :####.###
Display Position 2
Format ##.#
Display Position 1
Format #####.#####
